Go back to all tips

How to use TVU One Wired Remote Control

Use the USB-based TVU One Wired Remote Control device to trigger Start Live and Stop Live from a TVU One transmitter. The wired remote mounts to the shoulder strap of TVU One backpack.

How to use the TVU One Wired Remote Control device:

  1. Connect the wired remote to any of the TVU One USB ports.
  2. Open the TVU One Web interface. To enable this function, navigate to the Tally Light setting in the menu and select Enabled. Then, press Apply.
  3. Select the receiver you would like to use. Press the Go Live button to take it live from the TVU One device.
  4. Press the TVU logo button on the remote to enable Start Live. The tally LED displays red. Press the button once again to Stop Live. The green tally LED displays green.
  5. Route the USB cable through the top of the TVU One backpack and over the backpack shoulder strap.
FAQ TVU Networks- 24/7 live broadcast and streaming support

Have a question?

Check our FAQ page

Go to FAQs
FAQ TVU Networks- 24/7 live broadcast and streaming support

Can’t find what you need?

We’re here 24/7

Contact us

Watch our Youtube Tutorials

You can view a more in-depth video overview of our TVU One transmitter on our Youtube channel.

About TVU One

Visit the TVU One page to learn all the next level of live video transmission capabilities with the TVU One 4K. Deliver full broadcast quality 4K, 10-bit true 60fps HDR video at as low as 3Mbps with proven patented Inverse StatMux Plus technology, IS+. It’s also able to transmit live 1080p60 HDR at as low as 800Kbps.

error: Content is protected !!
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.